Showing all 10 results
1/2/5/10 TP4056 Micro USB 5V/1A Lithium Battery Charging Module TE585
$3.95 - $6.45 Inc. GST
Features: With a MINI USB port, can be charging rechargeable lithium battery directly as a phone charger. Retains voltage input wiring pads, convenient for DIY. This module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports. With LED indicators, easily read the
3V to 5V 1A USB Charger for Phone DC-DC Converter Step Up Boost Module
$3.91 - $4.60 Inc. GST
Features: Module Properties: non-isolated step-up module (BOOST) input voltage: 2.5-6V Output voltage: 4-12 V(Adjustable, the default 5 v) Output Current: the maximum 1000mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage
5V 2A LCD Mini DC Power Supply USB Step Down Converter 24V To 1-20V Adjustable
$25.33 - $29.80 Inc. GST
Description This product uses new low voltage and high currency efficient DC-DC power technologies with a microcomputer control system to monitor voltage and current in real time. Because of its small size and because it’s easy to carry, it’s the ideal and essential tool for students or small laboratories. Note: Input
AMS1117-3.3 DC-DC Step Down Power Supply Module 4.5V-7V 3.3V Voltage Regulator
$4.68 - $5.50 Inc. GST
Description Input: DC 4.5V–7V (input voltage must be greater than the output voltage high above 1V.) Output: 3.3V, 800mA (load current cannot exceed 800ma) Dual-panel design, the layout is nice; Specially designed two rows of needle fixing holes can be fixed directly in the tunnel for the board to extend
AMS1117-5.0V 6-12Vdc to 5V dc Voltage Regulator Module Power Supply Arduino
$4.68 - $5.50 Inc. GST
Input Voltage:6~12VDC. Output Voltage:5.0V(0.05V error). Output Current:800mA(Load Current can’t be more than 800mA ). PCB Size:25mm*11mm. with Power LED (Red).
LM2596 3A Adjustable Power supply module DC-DC Step-down Voltage regulator
$6.25 - $7.35 Inc. GST
LM2596S DC-DC 3.6-46V 3A adjustable step-down power Supply module With reverse connection protection 5V voltage regulator LM2596S upgrade! Increase the input with reverse connection protection, plus or minus the reverse would not burn module, strengthen the quality of the inductance, increase the service life of the product! Includes Voltage LED
MB102 Breadboard Power Supply Module 3.3V 5V For Arduino Solderless
$6.63 - $7.80 Inc. GST
Specification: 1.Brand new and high quality. 2.Breadboard power supply module, compatible with 5 V, 3.3 V Apply to MB102 breadboard 3.Input voltage: 6.5-12 V (DC) or USB power supply 4.Output voltage: 3.3V/5V can switch over 5.Maximum output current: <700 ma 6. Fluctuation two road independent control can switch over to
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module Arduino
$3.83 - $4.50 Inc. GST
The MT3608 2 Amp step up (boost) converter, can take input voltages as low as 2V and step up the output to as high as 28V. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection. This
XL6009 2A Booster Board DC-DC Step-up Module 2/24V To 5/9/12V MT3608
$5.06 - $5.95 Inc. GST
Highlights: The whole network smallest adjustable boost module can be easily installed in a variety of small equipment. The module supports MicroUSB input, a USB charger or mobile power supply can easily get to it 9V, 12V, 15V, 18V, 24V, easy to use. Wide input and output voltage, high conversion
XL6009 DC-DC Adjustable Step-up Boost Power Converter Module 4Amp Output
$5.82 - $6.85 Inc. GST
Features: IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output