6V 100mA 0.6W Solar Panel 120x38mm Mini DIY Power Module

🔧 6V 100mA Mini Solar Panel 0.6W 120×38mm | AuscomTech

This compact polycrystalline solar panel is designed for small DIY electronics, portable power experiments, and low-power renewable energy projects.

It provides a rated 6V output with 100mA rated current under suitable light conditions, making it suitable for charging circuits, sensor projects, microcontroller experiments, and small solar-powered builds.

The slim 120×38mm form factor is ideal where space is limited, including outdoor electronics, educational projects, solar toys, and custom battery charging setups.

⭐ Key Features

• Compact Panel Size – 120×38mm footprint for small enclosures and portable projects
• 6V Rated Output – suitable for low-power solar circuits and charging regulator input
• 100mA Rated Current – provides up to 0.6W peak output under suitable illumination
• Polycrystalline Cell Construction – practical and cost-effective for hobby and educational use
• DIY Friendly – easy to integrate into Arduino, ESP32, sensor, and battery-powered projects
• Series or Parallel Expandable – multiple panels can be combined to increase voltage or current when correctly wired

📊 Technical Specifications

• Type: Mini solar panel
• Cell Material: Polycrystalline silicon
• Rated Voltage: 6V
• Rated Current: 100mA
• Peak Power: 0.6W
• Dimensions: 120×38mm
• Test Condition: Light intensity 38000 lux
• Construction: PCB backplane with encapsulated solar cells

🧩 Typical Applications

• DIY solar power projects
• Arduino and ESP32 low-power experiments
• Battery charging circuits
• Outdoor sensor nodes
• Solar toys and educational kits
• Portable electronics prototypes
• Emergency or trickle power demonstrations

⚠️ Important Notes

• Output voltage and current depend on sunlight intensity, angle, temperature, and load.
• A diode, voltage regulator, or charge controller may be required depending on the battery or device being powered.
• Do not connect directly to lithium batteries without a suitable charging protection circuit.
• Observe correct polarity before connecting to any circuit.
• This panel is intended for low-power applications only.

📦 Package Includes

• 1 × 6V 100mA 0.6W Mini Solar Panel 120×38mm

🔗 Recommended Accessories (Not Included)

• Schottky diode – helps prevent reverse current flow
• DC-DC voltage regulator – stabilises output for electronic circuits
• Li-ion charging module – required for protected lithium battery charging
• JST connector leads – useful for clean removable wiring