AS5600 Magnetic Encoder Angle Sensor Module 12Bit I2C PWM Analog Arduino

🔧 AS5600 Magnetic Encoder Angle Sensor Module | AuscomTech

The AS5600 is a non-contact magnetic induction angle measurement module designed for precise rotary position sensing using a compatible diametric magnet.

It provides high resolution 12-bit angle measurement and supports multiple output methods including I2C, PWM, and analog voltage output for flexible integration with controllers and embedded systems.

This module is commonly used for knob position sensing, motor shaft angle feedback, robotics, automation, and Arduino-based motion or control projects.

⭐ Key Features

• AS5600 magnetic angle sensor – Accurate non-contact rotary position measurement with low mechanical wear.
• 12-bit resolution – Provides fine angle measurement for precise position feedback.
• Multiple output modes – Supports I2C communication, PWM output, and analog voltage output.
• 3.3V operation – Suitable for low-voltage embedded applications and sensor interfacing.
• Direction control pin – Rotation counting direction can be configured using the DIR input.
• Header pins included – Supplied with pin headers for easy soldering and prototyping.
• Microcontroller compatible – Suitable for Arduino, ESP32, STM32, and other development platforms using supported logic levels.

📊 Technical Specifications

• Sensor IC: AS5600
• Measurement Type: Non-contact magnetic induction angle sensing
• Resolution: 12-bit
• Supply Voltage: 3.3V
• Communication Interface: I2C
• Additional Outputs: PWM, analog voltage
• Pins: VCC, GND, OUT, DIR, SCL, SDA, GPO
• OUT Pin: PWM or analog voltage output
• DIR Pin: Rotation direction selection
• SCL Pin: I2C clock line
• SDA Pin: I2C data line
• GPO Pin: Mode selection / configuration pin

🧩 Typical Applications

• Rotary knob position sensing
• Motor shaft angle feedback
• Robotics and motion control
• Magnetic encoder projects
• Industrial position monitoring
• Arduino and ESP32 development
• Automation control systems

⚠️ Important Notes

• Requires a suitable magnet for operation; magnet is not included unless stated otherwise.
• Designed for 3.3V supply operation.
• Check logic-level compatibility before direct connection to 5V systems.
• Header pins are included but require soldering.
• I2C address and output behaviour depend on module configuration and firmware implementation.

📦 Package Includes

• 1 × AS5600 Magnetic Encoder Angle Sensor Module
• 1 × Header Pin Strip

🔗 Recommended Accessories (Not Included)

• Diametric magnet – required for angle sensing
• Jumper wires – for quick connections
• 3.3V compatible microcontroller – for integration
• Breadboard – for prototyping