Pair 3W 4 Ohm 3070 Speakers 70x30mm PH2.0 LCD TV Computer Audio

🔧 Pair of 3070 3W 4 Ohm Enclosed Speakers with PH2.0 Cables | AuscomTech

This pair of compact 70 × 30mm rectangular loudspeakers is designed for internal audio installations in LCD televisions, computer equipment, advertising displays and embedded electronics.

Each speaker is rated at 3W with 4 Ohm impedance and includes an integrated plastic enclosure with a pre-fitted 4P-PH2.0 connection cable.

The slim housings and four-point mounting design make the pair suitable for stereo replacement, repair and custom audio projects where installation space is limited.

⭐ Key Features

• Speaker Pair – supplied as two enclosed units for left and right audio installations
• 3W Per Speaker – suitable for compact amplified sound systems and voice playback applications
• 4 Ohm Impedance – designed for amplifier outputs rated to operate with a 4 Ohm speaker load
• 70 × 30mm Format – compact rectangular size used in displays, televisions and electronic equipment
• Integrated Enclosures – enclosed construction simplifies mounting inside cabinets and device housings
• Pre-Wired PH2.0 Connectors – attached cables support quick installation into compatible equipment
• Four-Point Mounting – corner fixing holes provide secure mechanical installation

📊 Technical Specifications

• Product Type: Pair of enclosed rectangular loudspeakers
• Quantity: 2 speakers
• Size Code: 3070
• Rated Power: 3W per speaker
• Impedance: 4 Ohm per speaker
• Speaker Dimensions: 70 × 30 × 16mm each
• Mounting Hole Spacing: 63 × 24mm
• Connection: 4P-PH2.0 cable on each speaker
• Housing: Integrated plastic enclosure
• Mounting: Four corner screw holes per speaker

🧩 Typical Applications

• LCD television speaker replacement
• Computer and monitor audio
• Advertising display systems
• Information kiosks and terminals
• Portable electronic equipment
• Stereo voice announcement devices
• Embedded amplifier projects
• DIY electronics and repair work

⚠️ Important Notes

• This listing is for one pair of 3W, 4 Ohm, 70 × 30mm speakers.
• Each speaker requires a compatible amplified output and cannot be driven directly from a low-level audio source.
• Confirm that the amplifier supports a 4 Ohm load per channel and does not exceed 3W per speaker.
• Check the mounting dimensions, connector type and wire configuration before ordering.
• Connector compatibility does not guarantee identical pin wiring between different devices.

📦 Package Includes

• 1 × Pair of 3070 3W 4 Ohm Enclosed Speakers with 4P-PH2.0 Cables

🔗 Recommended Accessories (Not Included)

• Stereo mini audio amplifier module – provides suitable left and right channel output
• PH2.0 mating connectors – connect the supplied cables to custom wiring
• Mounting screws and spacers – secure both housings inside equipment