These fans run on brushless bearings – meaning they run quietly and have a long lifespan.
They are lightweight and can be mounted to a moving carriage without impacting on its performance.
They are ideal for cooling 3D printer hotels, and are also great for cooling the print itself (if you want to print quickly or are printing tricky overhangs).
They can also be used to cool your electronics – RAMPS, step sticks, and such.
If your step sticks are overheating you’ll see layer shifts in your print – and adding a fan such as this is one of the easiest ways to correct this!
Simply put – adding a couple of well-placed fans will allow you to run your printer faster, keep it running longer, and get a better quality print. Perfect!
These fans come with a 2-pin JST connector – the type often found in hobbyist electronics on fans, LiPo batteries, and small motors. 170mm Colour coded cable.
If you do not have a matching connector available you can either cut the end off and solder on your own longer cables,
or alternatively, standard breadboard wire (solid core) will push straight into each socket of the connector, making a solid and stable connection.
30mm X 30mm x 10mm
5V :
Rated Current: 0.11±0.2 Amp
Rated Speed: 16500 ±10%rpm
Air Flow:9.8CFM
Noise: 15±10%dBA
Bearing Type: Sleeve
Life: 35000 hours
12V :
Rated Current: 0.13 Amp±10%
Rated Speed: 16500RPM±10%
Air Flow: 1.9CFM±10%
Noise Level: 20dBA±10%
Bearing Type: Sleeve Bearing
Life: 35000 hours
24V :
Rated Current: 0.13 Amp±10%
Rated Speed: 16500RPM±10%
Air Flow: 1.9CFM±10%
Noise Level: 20dBA±10%
Bearing Type: Sleeve Bearing
Life: 35000 hours
Includes
1 x 30mm Brushless Fan
Reviews
There are no reviews yet.