2.8 Inch ILI9341 240×320 SPI TFT LCD Touch Screen Module Arduino

🔧 2.8 Inch ILI9341 240×320 SPI TFT LCD Touch Screen Module | AuscomTech

This is a 2.8 inch colour TFT LCD screen module with 240 × 320 resolution and integrated touch input.

It uses the ILI9341 display driver with SPI serial communication, making it suitable for microcontroller projects that need a compact graphical interface.

Typical use includes Arduino, ESP32, Raspberry Pi, STM32, sensor dashboards, menu systems, control panels, and DIY embedded electronics projects.

⭐ Key Features

• 240 × 320 Touch Display – suitable for menus, buttons, graphics, sensor readouts, and user interfaces
• ILI9341 Driver – widely supported by common Arduino, ESP32, STM32, and Raspberry Pi display libraries
• SPI Serial Interface – reduces IO pin usage compared with parallel display modules
• 65K Colour Output – displays rich RGB colour for embedded graphics and interface projects
• Onboard SD Card Slot – can be used for images, fonts, icons, or project data where supported by software
• Backlight Control Pin – LED pin supports display illumination control

📊 Technical Specifications

• Screen Size: 2.8 inch
• Display Type: TFT LCD
• Driver IC: ILI9341
• Resolution: 240 × 320 pixels
• Display Colour: RGB 65K colour
• Interface: 4-wire SPI
• Touch Function: Yes
• Active Area: 43.2 × 57.6 mm
• PCB Size: 50.0 × 86.0 mm
• VCC Power Voltage: 3.3V–5V
• Logic IO Voltage: 3.3V TTL
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -30°C to +70°C
• Main Pins: VCC, GND, CS, RESET, DC/RS, SDI/MOSI, SCK, LED, SDO/MISO
• Touch Pins: T_CLK, T_CS and related touch signal pins

🧩 Typical Applications

• Arduino graphical display projects
• ESP32 touchscreen control panels
• Raspberry Pi SPI display experiments
• STM32 embedded interface projects
• Sensor dashboards and monitoring screens
• DIY handheld electronics projects
• Menu systems and user input panels
• 3D printer, CNC, and controller displays

⚠️ Important Notes

• This listing is for the ILI9341 version with touch panel.
• Logic IO level is 3.3V TTL. Use level shifting when required for 5V microcontroller signals.
• SD card is not included.
• Display, touch, and SD functions may share the SPI bus but require separate chip select pins.
• Library support and wiring depend on the controller board and software environment used.
• Confirm wiring and pinout before applying power.

📦 Package Includes

• 1 × 2.8 Inch ILI9341 240×320 SPI TFT LCD Touch Screen Module
• 1 × Touch Pen

🔗 Recommended Accessories (Not Included)

• Arduino UNO or Mega – for display testing and beginner projects
• ESP32 Development Board – for WiFi-enabled touchscreen interfaces
• Logic Level Converter – for safe 5V to 3.3V signal matching
• Dupont Jumper Wires – for SPI, touch, and power connections